Publicité
Les langues disponibles
Les langues disponibles
SYSTEME MENU
4. SYSTEME MENU
4.1.1 SYSTEME MENU > FIRMWARE > UPDATE FIRMWARE
The Update Settings section is used to upgrade the device's firmware. Firmware can be upgraded either from
server or from an image uploaded from your computer.
The figure below is an example of the Flash New Firmware Image section and the table below provides information
on the fields contained in that section:
Field
Upgrade from
Keep settings
Image
Firmware verification
When you upload a firmware image, the device will have to verify the validity of that image. If the verification was
successful, you will be redirected to window with a message such as this:
This means that the downloaded software image is compatible with your device.
If everything is OK, you can click the Continue button to start the update or Cancel to abort.
ALD-16690
4.1 SYSTEME MENU > FIRMWARE
The Firmware page can be used to check the current firmware version of the device and to
upgrade the device's firmware - either from a local file or from server.
Value
File | Server;
Default: File
Off | on;
Default: on
Interactive button
Description
Source of the firmware image. Can be either
downloaded from FOTA (Server) or uploaded from a
computer (File).
Ensures that all of the current device settings will be
kept after the firmware upgrade.
Click to browse your computer for a firmware image file.
212
Publicité
