NETWORK MENU
Mobile: Mobile Data Limit
The Mobile Data Limit section provides you with the possibility to set data usage limits for your mobile network
interfaces and data usage warnings via SMS message in order to protect yourself from unwanted data charges.
In order to view the Mobile Data Limit section, the interface protocol must be set to Mobile.
Field
Enable data connection limit Off | on;
Data limit* (MB)
Period
Start day | Start hour
Enable SMS warning
Data limit* (MB)
Phone number
Clear Collected Data
ALD-16690
Value
Description
Turns mobile data limitations on or off.
Default: off
Integer;
The amount of data that is allowed to be downloaded
Default: 1000
over the specified period of time. When the limit is
reached, the device will no longer be able to establish
a data connection until the period is over or the data
limit is reset.
Month | Week | Day;
Data limit period after which the data counter is reset
Default: Day
on the specified Start day.
Day [1..31] | day
Specifies when the period of counting data usage
[Monday..Sunday] |
should begin. After the period is over, the limit is reset
hour [1..24];
and the count begins over again.
Default: hour 0
Off | on;
Turns SMS warning on or off. When turned on and
Default: off
configured, sends an SMS message to a specified
number after the SIM card uses a specified amount of
data.
Integer;
The received data limit before sending an SMS warning.
Default: none
After reaching using the the amount of data specified
in this field, the router will send an SMS warning
message to the specified phone number.
Phone number;
Recipient's phone numbers.
Default: none
- (interactive button)
Clears the data limit counter.
179