Publicité
Les langues disponibles
Les langues disponibles
NETWORK MENU
Mobile
The Mobile protocol is used to set up an interface which can establish a mobile WAN connection.
Mobile: General Settings
Field
Mode
Auto APN
APN / Custom APN
Bridge | Passthrough: MAC
Address
ALD-16690
Value
Description
NAT | Bridge |
Mobile connection operating mode.
Passthrough;
• NAT - the mobile connection uses NAT (network
Default: NAT
• Bridge - bridges the LTE data connection with LAN.
• Passthrough - in this mode the I-NET 151 shares
Off | on;
The Auto APN feature scans an internal Android APN
Default: on
database and selects an APN based on the SIM card's
operator and country. If the first automatically selected
APN doesn't work, it attempts to use the next existing
APN from the database.
String;
An Access Point Name (APN) is a gateway between a GSM,
Default: none
GPRS, 3G or 4G mobile network and another computer
network. Depending on the contract, some operators
may require you to use an APN just to complete the
registration on a network. In other cases, APN is used to
get special parameters from the operator (e.g., a public
IP address) depending on the contract.
An APN Network Identifier cannot start with any of the
following strings:
• rac;
• lac;
• sgsn;
• rnc;
it cannot end in:
• .gprs;
and it cannot contain the asterisk symbol (*).
Mac;
Specifies the MAC address of the device that will
Default: none
receive the mobile interface's IP address in Bridge or
Passthrough mode.
Note: this field only becomes visible when using Bridge
or Passthrough mode.
address translation).
The device assigns its WAN IP address to another
device (first connected to LAN or specified with MAC
address). Using Bridge mode will disable most of the
device's capabilities.
its WAN IP to a single LAN device (first connected to
LAN or specified with MAC address). The LAN device
will get WAN IP of I-NET 151 instead of LAN IP. Using
Passthrough mode will disable most of the device's
capabilities.
178
Publicité
