Publicité
Les langues disponibles
Les langues disponibles
NETWORK MENU
Advanced Settings: DHCP
Advanced Settings information for DHCP protocol is provided in the table below.
Field
Use built-in IPv6
management
Force link
Use broadcast flag
Use default gateway
Use gateway metric
Use custom DNS servers
Client ID to send when
requesting DHCP
Vendor Class to send when
requesting DHCP
Override MAC address
Override MTU
IP4table
ALD-16690
Value
Description
Off | on;
Specifies whether to enable prefix delegation.
Default: on
Off | on;
Specifies whether interface settings (IP, route, gateway)
Default: off
are assigned to the interface regardless of the link being
active or only after the link has become active.
Off | on;
Required for certain ISPs. For example, Charter with
Default: off
DOCSIS 3.
Off | on;
When checked, creates a default route for the interface.
Default: on
Integer;
A metric specifies the priority of the gateway. The lower
Default: none
the metric, the higher the priority (0 for highest priority).
Ip4;
Specifies custom DNS servers. If left empty, DNS servers
Default: none
advertised by peer are used.
String;
Client ID which will be sent when requesting a DHCP
Default: none
lease.
String;
Vendor class which will be sent when requesting a DHCP
Default: none
lease.
Mac;
When set, uses a user-defined MAC address for the
Default: none
interface instead of the default one.
Integer [1..9200];
Changes the interfaces allowed maximum transmission
Default: none
unit (MTU) size. It is the largest size of a protocol data
unit (PDU) that can be transmitted in a single network
layer transaction.
Integer [0..99999999];
ID of the routing table in Routing tables page.
Default: none
189
Publicité
