Publicité
Les langues disponibles
Les langues disponibles
NETWORK MENU
Advanced Settings: DHCPv6
Advanced Settings information for DHCPv6 protocol is provided in the table below.
Field
Use built in IPv6-
management
Force link
Use default gateway
Use custom DNS servers
Custom delegated IPv6-
prefix
Client ID to send when
requesting DHCP
Override MAC address
Override MTU
IP4table
ALD-16690
Value
Description
Off | on;
Specifies whether to enable prefix delegation.
Default: on
Off | on;
Specifies whether interface settings (IP, route, gateway)
Default: off
are assigned to the interface regardless of the link being
active or only after the link has become active.
Off | on;
When checked, creates a default route for the interface.
Default: on
Ip4;
Specifies custom DNS servers. If left empty, DNS servers
Default: none
advertised by peer are used.
Ip6 prefix;
Uses an (additional) user-provided IPv6 prefix for
Default: none
distribution to clients.
String;
Client ID which will be sent when requesting a DHCP
Default: none
lease.
Mac;
When set, uses a user-defined MAC address for the
Default: none
interface instead of the default one.
Integer [1..9200];
Changes the interface's allowed maximum transmission
Default: none
unit (MTU) size. It is the largest size of a protocol data
unit (PDU) that can be transmitted in a single network
layer transaction.
Integer [0..99999999];
ID of the routing table in Routing tables page.
Default: none
190
Publicité
