Publicité
Les langues disponibles
Les langues disponibles
NETWORK MENU
Advanced Settings
The Advanced Settings section is used to set up some of the more specific and less frequently used interface
parameters. This section is different for each protocol.
Advanced Settings : Static
Advanced Settings information for Static protocol is provided in the table below.
Field
Value
Use built
Off | on;
in IPv6-
Default: on
management
Force link
Off | on;
Default: on
Use gateway
Integer;
metric
Default: 3
Override MAC
Mac;
address
Default: none
Override MTU
Integer [1..9200];
Default: none
IP4table
Integer [0..99999999];
Default: none
ALD-16690
Description
Specifies whether to enable prefix delegation.
Specifies whether interface settings (IP, route, gateway) are assigned
to the interface regardless of the link being active or only after the
link has become active.
A metric specifies the priority of the gateway. The lower the metric,
the higher the priority (0 for highest priority).
When set, uses a user-defined MAC address for the interface instead
of the default one.
Changes the interface's allowed maximum transmission unit (MTU)
size. It is the largest size of a protocol data unit (PDU) that can be
transmitted in a single network layer transaction.
ID of the routing table in Routing tables page.
188
Publicité
