Publicité
Les langues disponibles
Les langues disponibles
NETWORK MENU
Global Settings
For reasons of stability of operation of your router, it is strongly advised not to modify the
!
parameters of this menu. This menu is for advanced users only.
The Global Settings section is used to configure WiFi hardware settings. You can find this section by clicking the
"Edit" button next to a WiFi device ( not an interface ) in the Network → WIFI page :
General Setup
The General Setup section is used to turn a wireless device on or off, select the operating frequency (WiFi mode
and channel), transmit power and define a country code.
A wireless 2.4 GHz WiFi channel requires a signaling band roughly 22 MHz wide, radio frequencies of neighboring
channels numbers significantly overlap each other. Choose a WiFi channel according to the busyness of other
channels. You can download a free WiFi analyzer app on your phone, laptop or other WiFi device and check which
channel is the least populated.
Many home networks utilize routers that by default run on channel 6 on the 2.4 GHz band. Neighboring WiFi home
networks that run over the same channel generate radio interference that can cause significant network perfor-
mance slowdowns for users. Reconfiguring a network to run on a different wireless channel helps minimize these
slowdowns. Therefore, pick a channel with no other active Access Points and preferably one that has no active
Access Point on two adjacent channels on each side as well. If you don't feel like doing this, set the 'Channel' field
to Auto and the device will pick the least busy channel in your location automatically.
Field
Enable
ALD-16690
Value
Description
Off | on;
Turns Wireless device on or off.
Default: on
198
Publicité
