Publicité
Les langues disponibles
Les langues disponibles
NETWORK MENU
Advanced settings
Field
Isolate Clients
Short Preamble
DTIM interval
Time interval for rekeying
GTK
Disable Inactivity Polling
Station inactivity limit
Maximum allowed Listen
Interval
Disassociate On Low
Acknowledgement
ALD-16690
Value
Description
Off | on;
Prevents client to client communication on the same subnet.
Default: off
Off | on;
Uses Short Preamble, it uses shorter data strings that
Default: on
adds less data to transmit the error redundancy check
which means that it is much faster.
seconds; default: none Delivery Traffic Indication Message Interval.
seconds; default: none Period of time in between automatic changes of the
group key, which all devices on the network share.
off | on; default: off
Inactivity polling can be disabled to disconnect stations
based on inactivity timeout so that idle stations are
more likely to be disconnected even if they are still in
range of the AP.
seconds; default: none Station inactivity limit in seconds. If a station/client
does not send anything in st time frame, an empty data
frame is sent to it in order to verify whether it is still
in range. If this frame is not acknowledged, the station
will be disassociated and then deauthenticated.
positive integer;
Association will be refused if a client/station attempts to
default: none
associate with a listen interval greater than this value.
off | on; default: on
Allow AP mode to disconnect stations/clients based on
low Acknowledgement condition.
203
Publicité
