NETWORK MENU
General Setup: PPPoE
The PPPoE protocol is used to set up a PPP (Point-to-Point Protocol) connection over the Ethernet port.
Field
PAP/CHAP username
PAP/CHAP password
Access Concentrator
Service name
General Setup: Mobile
The Mobile protocol is used to set up an interface which can establish a mobile WAN connection.
Mode : NAT
ALD-16690
Value
String;
Default: none
String;
Default: none
String;
Default: none
String;
Default: none
Description
Username used in PAP/CHAP authentication.
Password used in PAP/CHAP authentication.
The Access Concentrator to connect to. ISPs used
Access Concentrators to route their PPPoE connections.
Usually, the settings are received automatically, however
in some cases it is required to specify the name for an
Access Concentrator. Leave empty to detect Access
Concentrators automatically.
The Service Name to connect to. Leave empty to detect
Service name automatically.
183