Publicité
Les langues disponibles
Les langues disponibles
NETWORK MENU
Lastly, in Advanced Settings tab enable Forward mesh peer traffic and set RSSI threshold for joining to -80. Leave
the rest as set by default.
Mesh Node
Mesh node is configured the same way as mesh gateway. Node has to match gateway's wireless mesh interface
configuration. Additionally, LAN interface has to be setup as DHCP client:
1. Access router's WebUI. Navigate to Network → Interfaces.
2. Press pencil icon on the right of the LAN interface.
3. Change Protocol to DHCP.
Click Save & Apply and If everything was setup correctly, mesh node should be ready use.
Multi-access points
Introduction:
The "Multi AP" function allows a set of Wi-Fi networks to be addressed, grouped under a single interface.
The router continuously analyses all the Wi-Fi networks that have been entered, selects the best performing one and
makes it available to the user.
As with the "Customer Service" function, a "Multi AP" Wi-Fi interface has priority over the WAN and Mobile 4G interfaces
in the interface list.
This function can be used when you want to create a Wi-Fi repeater between your computer and any of the Wi-Fi
networks listed in the "Multi AP" function, without having to worry about the status of the different Wi-Fi networks.
IMPORTANT : The I-NET 151 router is equipped with an intelligent module that checks the accessibility of the
internet via the different interfaces. If a created Wi-Fi interface becomes inaccessible, the router
automatically switches to the next operational interface (WAN or Mobile 4G).
Name your network (this will be the name of your MULTI AP interface) and assign a firewall zone (it is recom-
mended to keep the default zone assigned) and click on the "Create" button.
ALD-16690
206
Publicité
