Publicité
Les langues disponibles
Les langues disponibles
NETWORK MENU
General Settings
The General Settings section for Multi AP is used to turn it on or off and to change the frequency of scanning for
WiFi APs.
Field
Enable
Scan Time (sec)
Upload AP list
Access Points
You can either configure multiple access points from this page of the WebUI or you can upload a file with a list
of access point configurations. The file should contains WiFi access point configuration options and values, which
should be defined as option: value (for example, ssid: home_wifi). The SSID option is mandatory.
NOTE: Do not forget to activate each access point by sliding the right button to On.
Field
SSID
Key
Enable
Delete
Option names in the file should be provided in lower case letters. AP list file example:
identifiant de connexion : INET_1
activer : 1
clé : 12345678
ssid : INET_2
activer : 0
clé : 87654321
Once uploaded, the contents of the file should become visible in the Access Points list.
ALD-16690
Value
Description
Off | on;
Turns Multi AP configuration on or off.
Default: off
Integer (30+);
Frequency (in seconds) of scans for WiFi access point
Default: 60
availability.
- (interactive button)
Uploads a list of access point configurations.
Value
Description
String;
SSID of an access point.
Default: none
String;
Pre-shared key, a custom passphrase used for user
Default: none
authentication (at least 8 characters long).
Off | on;
Turns an access point configuration on or off.
Default: off
- (interactive button)
Deletes the access point configuration next to the
button.
207
Publicité
