Publicité
Les langues disponibles
Les langues disponibles
NETWORK MENU
2. NETWORK MENU
2.1 NETWORK MENU > MOBILE
The Mobile page is used to configure mobile connection settings.
2.1.1 NETWORK MENU > MOBILE > GENERAL
The General section is used to configure SIM card parameters that define how the device will establish a mobile
connection.
This man page provides an overview of the Mobile page in I-NET 151 devices.
SIM card settings
The SIM Card Settings section is used to configure main SIM card parameters. Refer to the figure and table below
for information on the fields contained in that section.
Deny data roaming
Off | on;
Default: off
VoLTE
Auto | On | Off;
default: Auto
Service mode
Auto | 4G (LTE) only |
3G only;
Default: Auto
PIN
Integer
[0000..99999999];
Default: none
Activate to enter
Off | on;
PUK code
Default: off
Band selection
Auto | Manual
Default : Auto
ALD-16690
If you're having trouble finding this page or some of the parameters described here on
your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by
clicking the "Basic" button under "Mode", which is located at the top-right corner of the
WebUI.
Denies data connection on roaming conditions.
Enables Voice over LTE, a digital packet technology that uses 4G
LTE networks to route voice traffic and transmit data.
Network connection type preference.
SIM card's PIN (Personal Identification Number) is a secret numeric
password used to authenticate the device to the SIM card. PIN codes
are comprised of numbers only and the length can range from 4 to
8 symbols. PIN number is saved in flash memory therefore it does
not reset when default settings are restored.
On: Displays a box to enter the PUK code of the SIM card.
Note: The PUK code is a unique SIM-specific code provided by the
operator. It allows a SIM card to be unlocked when the maximum limit
of 3 wrong PIN codes have been entered.
Manual: Displays the boxes for manually selecting the UMTS and
LTE bands to connect to.
173
Publicité
