Motorola MTX1550 Guide De L'utilisateur page 61

20L01-A_PR_UG_MTX4500.book Page 59 Friday, April 13, 2007 2:47 PM
5 The display shows the
current mode. The
audible alert, LED and
call received annunciator
turns off.
6 The ID number of the radio that paged you is
stored as "the last ID number received."
Note: The blinking green LED, alert tone, and
blinking annunciator will continue until the
Call Alert is acknowledged (press PTT, or
press and release the monitor button).
Making a Call Alert
There are three phases in making a call alert,
namely
• initiating a call alert,
• entering the radio ID number that you wish to
page, and
• sending the call alert.
Initiating a Call Alert
1 Press / until PAGE is
FIRE DEPT
displayed.
2 Press l (the softkey below PAGE).
3 The display shows the
last ID number
transmitted or received.
Note: The same list is shared by both Call Alert and
Entering the Radio ID Number that you
wish to Page
The procedure for entering the Radio ID Number is
exactly the same as the process outlined in the
Select Call section. Please refer to Entering the
Desired Radio ID Number on page 57.
PAGE PHON VIEW
ID: 2350
Select Call features.
• If your radio has been so programmed, you
can press the page button for quick access
to the Call Alert feature. This takes you
directly to Step 3.
59
Englis