Motorola MTX1550 Guide De L'utilisateur page 33

20L01-A_PR_UG_MTX4500.book Page 31 Friday, April 13, 2007 2:47 PM
4d Enter the second digit of the location number.
4e The radio goes to that
position in the list. The
display alternates
between showing the
member's name and ID
number.
Note: The last member of the list is also the "last ID
transmitted or received" at position "00" on
the list.
• If you enter a location number that does
not exist (for example, "15"), the display
shows "INVALID ENTRY", and the radio
sounds an invalid-keypress tone and
returns to Step 4b of this procedure.
Sending the Call Alert
5 Press the PTT switch to transmit the ID
number.
If the Page is Unsuccessful
6a If you hear one beep, the ID number has
Alternates between
CK TANG
and
ID: 784116
6b Press the PTT switch to send the ID number
If the Page is Successful
6a If you hear five beeps, the ID number has
6b The radio automatically
been received by the system, but the radio
you are paging is not on the air; your radio
remains in the Call Alert mode.
If after six seconds the called radio fails to
acknowledge the alert, a low-pitched alert
tone sounds and the display changes to "NO
ACKNOWLEDGE".
again, or press to hang up and return
to the home display.
been received by the system, and the radio
you are paging is on the air and has received
your page.
returns to the home
PLANT POLICE
display
31
Englis