Publicité
Les langues disponibles
Les langues disponibles
20L01-A_PR_UG_MTX4500.book Page 26 Friday, April 13, 2007 2:47 PM
Initiating a Private Call
1 Press / until CALL is
displayed.
2 Press l (the softkey below CALL).
3 The display shows the
last ID number
transmitted or received.
Entering the Desired Radio ID Number
If the last ID number called is the desired number, go
directly to Step 5.
To Enter a New Number
4a Enter the new six-digit ID number using the
keypad.
4b On the display, the old ID number disappears
and the new digits appear as they are being
entered.
4c The cursor blinks indicating the location of the
next number to be entered.
Note: Exactly six digits must be entered for the
26
English
ZONE MUTE CALL
ID: 722588
radio ID number. If fewer than six digits are
entered, you hear a bad-keypress tone and
the display shows "INVALID ENTRY" when
attempting to send the radio ID number. You
will also hear a bad-keypress tone if you try
to enter a seventh digit.
• Once you have started entering numbers,
the , key functions as a backspace
key. Pressing it causes the last digit
entered to be erased, and the cursor
moves to the left. When the last digit is
erased, an additional press of this key
causes the last ID number transmitted or
received to be displayed; pressing /
shows the first member of the list.
To Enter a Number from the Call List
4a Press either , or /.
4b / takes you forward to the first or next
member of the list; , takes you
backwards to the last or previous member of
the list.
4c When at a member of
the list, the display
alternates between
showing the member's
name and ID number.
Alternates between
CK TANG
and
ID: 784116
Publicité
