Publicité
Les langues disponibles
Les langues disponibles
20L01-A_PR_UG_MTX4500.book Page 25 Friday, April 13, 2007 2:47 PM
2 The green LED and call received status
annunciator, F
is being received. You have 20 seconds to
answer the call before the radio automatically
returns to the home display.
3 Press the call response button or the call
button.
4 The display shows the
incoming caller's ID
number, and the call
received annunciator
turns off.
5 After viewing the caller's ID number, you can
decide to either talk privately (go to next step),
or not answer the call by pressing the call
response or call button to return to the home
display.
6 If you decide to answer the call, press the PTT
switch.
7 The caller's ID number
remains displayed for
the duration of the call.
,
will blink indicating that a call
ID: 722588
ID: 722588
8 When finished with conversation, press
or the call response button to hang up.
9 The radio returns to the
home display.
Note: If you press the PTT switch before you press
the call response button, the response is
transmitted to everyone in the talkgroup (a
dispatch mode operation).
•
After answering a Private Call, the
caller's ID number is stored in your radio
as the "last ID number received".
•
If your radio is configured for Private Call
II, upon receiving a Private Conversation
call, two alert tones sound, followed by
the received voice.
Making a Private Call
There are four phases in making a private call, namely
• initiating a private call,
• entering the desired radio ID number,
• sending the radio ID number, and
• having the conversation and hanging-up.
PLANT POLICE
25
Englis
Publicité
