Publicité
Les langues disponibles
Les langues disponibles
20L01-A_PR_UG_MTX4500.book Page 29 Friday, April 13, 2007 2:47 PM
CALL ALERT OPERATION
Answering a Call Alert Page with a Group
Call
1 Upon receiving a Call Alert page, four alert
tones sound (repeats every 5 seconds).
2 The green LED lights and the Call Received
annunciator, F, blinks indicating a call is
received.
3 Press the PTT switch to answer the page.
4 The display shows the
current talkgroup. The
audible alert, LED and
call received annunciator
turns off.
5 The ID number of the radio that paged you is
stored as "the last ID number received."
6 Have your conversation in the normal manner;
all members of your talkgroup will hear your
response. Press the PTT switch to talk;
release the switch to listen.
Note: When you receive a Call Alert page, you can
enter Private Call mode and call the paging
radio using the latest ID received.
Making a Call Alert
There are three phases in making a call alert, namely
• initiating a call alert,
• entering the radio ID number that you wish to
page, and
• sending the call alert.
Initiating a Call Alert
1 Press / until PAGE is
displayed.
2 Press l (the softkey below PAGE).
3 The display shows the
last ID number
FIRE DEPT
transmitted or received.
Note: The same list is shared by both Call Alert and
PAGE PHON VIEW
ID: 722588
Private Conversation features.
• If your radio has been so programmed, you
can press the page button for quick access
to the Call Alert feature. This takes you
directly to Step 3.
29
Englis
Publicité
