Publicité
Les langues disponibles
Les langues disponibles
20L01-A_PR_UG_MTX4500.book Page 55 Friday, April 13, 2007 2:47 PM
STAT-ALERT FEATURES
This section outlines the Stat-Alert features of your
radio. Stat-Alert is an option which you can enable
for your radio. Please see your dealers for more
information.
All references to what is shown on the display is
only valid for Model II radios. Throughout this
section, the display below
is used to indicate the radio's home display.
VIEWING YOUR RADIO'S ID NUMBER
To View Your Radio's ID Number
1 Press / until CALL is
displayed.
2 Press l (the softkey below CALL).
3 The display shows the
last ID number
transmitted or received.
4 Press ,.
5 The display shows the
last Group ID number
transmitted or received.
PLANT POLICE
ZONE MUTE CALL
ID: 1048
GROUP: 105
6 Press ,.
7 The display shows your
radio's ID number.
8 Press ,.
9 The display shows your
radio's Group ID
number.
10 Press
to return
the radio to the home
display.
Note: If your radio has been so programmed, you
can press the call button for quick access to
viewing your radio's ID number. This takes
you directly to Step 3.
STAT-ALERT VOICE SELECTIVE CALL
OPERATION
This feature provides a convenient way for a
dispatcher to voice page an individual or group.
Voice selective call decode also eliminates the need
for you to listen to traffic that is of no concern to you.
This is a per-radio feature, enabled on a per-mode
basis, and available as individual call or group call.
Voice Selective Call is another method of unmuting
a radio other than PL codes. Radios with Voice
MY ID:1048
MY GRP:001
PLANT POLICE
55
Englis
Publicité
