Publicité
Les langues disponibles
Les langues disponibles
How to Use
EN
Sweeping Function
Note: Do not attach the mop pads while using the sweeping function.
Method 1: Press the
button on the base sand the robot will start
sweeping.
Method 2: Press the
button on the robot and the robot will start sweeping.
Note:
· Make sure that the robot is fully charged before using it. Do not manually move
the robot when it is cleaning.
· If the battery gets low while cleaning, the robot will return to the base and resume
cleaning after charging its battery. The "Resume Cleaning" function must be enabled
on the app in advance.
Cleaning Mode
After the robot is turned on, it cleans each room by cleaning along the
edges and walls first and then cleaning in an S-shaped pattern. The robot
automatically returns to the base to charge its battery after cleaning.
12
Mopping Function
Note: Do not use the mopping function on the carpet.
1. Attach the mop pads
2. Take out the fresh tank, fill it with clean water, and then place the fresh
tank into the base.
MAX
To the MAX Line
Note:
· Do not fill with hot water, otherwise the fresh tank may be deformed.
· Use only Dreame-branded detergents to help prevent malfunction.
How to Use
3. Place the robot onto the base
4. Start mopping
Press the
button. The robot will start from the base and mop the house based
on the optimal cleaning plan arranged in the map.
Note:
· If the robot is not on the base, please put it back before starting it.
· The robot will clean the mop pads before it starts cleaning. Please wait patiently
until the mop pads are cleaned.
· Do not manually move the base, fresh tank, waste tank, or washboard while mopping.
5. Return to self-clean
While mopping, the robot will return to the base to have the mop pads
cleaned according to cleaning conditions set in the app. The robot will
resume cleaning after the mop pads are cleaned.
6. Clean the mop pads
After the robot completes cleaning and returns to charge, the base will start
cleaning and drying the mop pads.
Note:
· To engage mop cleaning at any time, press and hold the
button on the base for 3 seconds.
· While cleaning the mop pads, if the water in the fresh tank is insufficient or the
waste tank is full, the robot will send a voice prompt, or the app will send a notification.
· After the robot finishes mopping, promptly clean the waste tank to prevent mold
or odor. Changing the mop pads every 1 to 3 months is recommended.
EN
13
Publicité
