Dreame DreameBot W10 Pro Mode D'emploi page 10

Routine Maintenance
EN
Fresh Tank
* Clean the filter media once every 2 weeks
1. Open the fresh tank cover, move the hose to the side to remove and clean
the filter media as shown in the diagram.
2. Put the filter media and hose back in their original position.
16
Waste Tank
* Clean after each use
1. Take out the waste tank, open the waste tank cover, and then dump the
wastewater.
2. Clean the waste tank with water and put it in the base.
Note: The floating ball in the waste tank is a moving part. Do not clean the floating
ball excessively in case of affecting its functions.
Routine Maintenance
Washboard
* Clean once every 2 weeks
1. Press the clips on both sides of the bottom of the base to remove the
washboard.
Click Click
2. Use the provided cleaning tool to clean the washboard completely.
3. Wipe the bottom of the base with a dry cloth.
4. Insert the washboard into the base as shown in the diagram, making sure
that both clips are in place.
Click Click
Note: Make sure that the washboard brackets are in place.
EN
17