Dreame DreameBot W10 Pro Mode D'emploi page 5

Product Overview
EN
Self-Wash Base
Upper Cover
Water Tank Plug
Control Panel
Washboard Clips
Mop Pad
Washboard
Clip Clip
Floating Ball Filter Media
Waste Tank Fresh Tank
6
Control Panel
Return-to-Base Clean Button
/ Exit Button
Display Screen
Return-to-Base / Exit Button
When the robot is on the base:
·
Press briefly to make the robot exit the base.
· Press and hold for 3 seconds to clean and dry the mop pads.
When the robot is out of the base:
·
Press briefly to send the robot back to the base. The robot resumes
cleaning after the mop pads are cleaned.
· Press and hold for 3 seconds to stop cleaning and send the robot
back to the base to have the mop pads cleaned and dried.
Clean Button
Press briefly to start or pause cleaning.
Child Lock
Press and hold the and buttons for 3 seconds to activate or deactivate
Child Lock. After Child Lock is activated, all buttons on the robot and the base
are locked.
Product Overview
Self-Wash Base
Power Port Signaling Area
Self-Wash Base Back
Charging Contacts
Washboard Bracket
Overflow Sensors
Overflow Sensors
Dust Bin
Bin Clip
Bin Cover
· Push gently in the direction
indicated by the arrow to open
the cover
Filter
EN
7