Publicité
Les langues disponibles
Les langues disponibles
PREP Your Home
EN
Remove power cords, slippers, and hard objects that may collide with the
robot to improve work efficiency.
Open the door of the room to be cleaned, and put the furniture in its proper
place to leave more space.
Note: When operating the robot for the first time, follow it around while cleaning to remove any potential obstacles in time.
To prevent the robot from not recognizing areas that need to be cleaned, do not stand in front of the robot, threshold, hallway, or narrow places.
8
Before cleaning, place a physical barrier at the edge of the stairs and sofa
to ensure the secure and smooth operations of the robot.
The robot can recognize objects with an AI Visual sensor. To keep the
optimal recognition performance, make sure all areas to be cleaned are
well illuminated.
Before Use
1. Remove the protective strips
2. Install the side brush
Install the side brush
until it clicks into place.
Click
3. Place the base against the wall and charge the robot
· Install the base in a location that is as open as possible with a good Wi-Fi signal.
· Insert the power cord into the base and plug it into the socket.
· Place the robot onto the base, and the robot will trun on
automatically and start charging.
· Fully charging the robot before the first use is recommended. After the robot
is fully charged, the status indicator will illuminate white for 10 minutes and
will then dim.
Within the Good Wi-Fi
Range
>1.5 m
Note:
· Remove any objects that are closer than 1.5 m from the front and 5 cm from either
side of the base.
· Make sure that no objects might block the signaling area.
· To prevent water stains from wetting wood floors or carpets, placing the base on
tile or marble floors is recommended.
EN
9
Publicité
