Télécharger Imprimer la page

Dreame DreameBot W10 Pro Mode D'emploi page 3

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
Safety Information
EN
· Do not use a wet cloth to wipe or any liquid to rinse the robot and base. Washable parts must be
dried completely before installing and using them.
· Please use this product in accordance with the instructions in the User Manual. Users are
responsible for any loss or damage that arise from improper use of this product.
· Do not use any third-party battery or self-wash base. Use only with RCS4 supply unit.
Batteries and
· Do not attempt to disassemble, repair, or modify the battery or self-wash base on your own.
Charging
· Do not place the self-wash base near a heat source.
· Do not use a wet cloth or wet hands to wipe or clean the base's charging contacts.
· Do not improperly dispose of old batteries. Unneeded batteries should be discarded at an
appropriate recycling facility.
· If the power cord becomes damaged or broken, stop using it immediately and contact after-
sales service.
· Make sure the robot is turned off when being transported and kept in its original packaging if possible.
· If the robot will not be used for an extended period of time, fully charge it, then turn it off and store it in a
cool, dry place. Recharge the robot at least once every 3 months to avoid over-discharging the battery.
· The lithium-ion battery pack contains substances that are hazardous to the environment. Before
disposing of the robot vacuum, please first remove the battery pack, then discard, or recycle it in
accordance with local laws and regulations of the country or region it is used in.
· When removing the batteries from the product, it is better to use up the batteries and make sure your
product is disconnected from power. Uninstall the screw on the bottom, then remove the cover.
· Unplug the battery connector, then remove the batteries. Do not damage the battery case to avoid any
risk of injuries.
· Return the batteries to a professional recycling organization.
· The laser distance sensor complies with the IEC 60825-1:2014 standard for Class 1 laser
Laser Safety
Information
products and does not generate dangerous laser radiation.
Hereby, Dreame Trading(Tianjin)Co., Ltd. declares that the radio equipment type RLS6TAC is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following internet address: https://global.dreametech.com
For detailed e-manual, please go to https://global.dreametech.com/pages/user-manuals-and-faqs
2
Product Overview
Package Contents
Side Brush
Power Cord
Mop Pad (×2)
W10
Pro
Self-Cleaning Robot Vacuum and Mop
User Manual
The illustrations in this manual are for reference only. Please refer to the actual product.
Cleaning Brush
User Manual
Note:  Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product
enhancements.
Cleaning Tool
Robot
Self-Wash Base
(Including a fresh tank, waste tank,
and washboard)
EN
3

Publicité

loading