Publicité
Les langues disponibles
Les langues disponibles
1.4 Handling, transportation and unloading
The appliances' packaging is produced by the company in accordance with the arrangements signed
case by case or , nonetheless, depending on what country the appliance is being sent to, or on the
means of transport used.
Once the appliance is installed, packaging can be reused or disposed of in accordance with the regulations
in force in the purchaser's country.
Ovens must be carried complete with their packaging to a spot near the installation site.
Employ the services of specialized personnel for all operations involved in lifting and handling the oven
or separate parts transported independently.
Material sent is checked thoroughly before being handed over to the forwarding agent.
On receiving the oven, make sure it has not been damaged during transit, and that packaging has not
been tampered with, and hence contents removed.
If you find the material has been damaged, or parts are missing, advise the carrier and Manufacturer
without delay, submitting photographic evidence.
Remember to make sure material supplied matches order specifications.
Don't drag or incline the oven for any reason.
The oven is to be lifted up perpendicularly to the floor, moved in a horizontal direction
and then laid down perpendicularly to the floor.
1.5 Conformity to directives/Standards
Ovens comply with the provisions and safety requirements indicated in the following European Directives
and their specific associated standards:
• Directive
2006/42/EC
• Low voltage safety directive
• Electromagnetic compatibility directive 2004/108/EC and later amendments.
By virtue of said conformities, the Manufacturer declares that its products comply with the European
legislation in force and, consequently, feature regulation CE marking enabling them to be sold in
European countries.
Also, the functional components of the oven have a noise emission level of below 70 dB (A).
and later amendments.
2006/95/EC
and later amendments.
17
GB
Publicité
