Publicité
Les langues disponibles
Les langues disponibles
GB
• Only use original spare parts listed on the attached list.
• Before installation, make sure that the electrical power supply and water supply values are compatible
with the values given on the technical data plate.
• Electrical safety of ovens is assured by connection to en efficient earth system (which must be inspec-
ted at regular intervals) in compliance with regulations in force.
• Only specifically trained personnel should be allowed to use and supervise ovens during use.
• Do not have the appliance installed near sources of heat such as fryers, hobs etc.
• Under no circumstances obstruct the vents.
• Ask your installer for instructions on how to use the water softener/scale eliminator properly.
(Warning: if the resin regeneration procedure is not perfect, it may cause the appliance to
rust).
• Before using the oven for the first time, it must be carefully cleaned:
-
clean the outside using only a damp cloth;
-
the inside of the cooking compartment must be cleaned with water;
-
in any case, do not use steel wool scouring pads to clean the oven.
Failure to comply with these rules may compromise safety of both the appliance and
user.
Should either the user or technical personnel given the task of installing the appliance
fail to comply with the regulations contained herein, the Manufacturer shall decline all
responsibility, and any accident or trouble as a result of said non-compliance shall not
be attributable to the Manufacturer.
The manifacturer declines every responsability for possibile mistakes contained in
this booklet imputable to printing or transcription errors.
It also reserves the right to bring changes to the product if retained useful or ne-
cessary without jeopardizing the essential characteristics.
1.3 Technical specifications and rating plate
Dimensions
Electric power
Power supply
Wiring type
No-load oven weight
Max. Food load
Number of pans
Number of fans
Mounting
Water inlet
Water pressure
Water hardness
Insulation class
IP rating
Control panel
BRIO...
600×595x560 mm
600×595x560 mm
2,5 kW
230V~50/60Hz
H05RN-F 3x1,5 mm² H05RN-F 3x1,5 mm² H05RN-F 3x1,5 mm²
36 kg
PER SHELF
4 kg
4
1
BRIOX...
860×775x525 mm
2,7 kW
230V~50/60Hz
230V~50/60Hz
36 kg
PER SHELF
4 kg
6 kg
4
2
ON BENCH OR STAND
3/4" G (optional)
150÷400 kPa (1,5÷4 bar)
Max 3° F
I
IPX3
ELECTROMECHANICAL
16
BRIO MIDI...
BRIO MAXI...
860×775x605 mm
3,2 kW
400 (2N)V ~(50/60 Hz)
230 V ~ (50/60 Hz)
H05RN-F 4x2,5 mm²
H05RN-F 3x4 mm²
59 kg
PER SHELF
6 kg
3
1
6,3 kW
68 kg
PER SHELF
4
2
Publicité
