Disposal After Use; Spare Parts List - Tecno-gaz SLIM Notice D'utilisation Et D'entretien

Making any changes to this device
is forbidden.
Disposal at end-of-life
Only original spare parts must be
Description
Sterilisable handpiece
Electronic board
Membrane keyboard
O/I switch (for mobile and wall versions)
Switching power supply unit
Fuse T1AH 250V '5x20'
Fuse T2AH 250V '5x20'
MU_023 Rev.2
used.
28/10/2019
OPERATION AND
MAINTENANCE MANUAL
Remove the fuse carrier (1) from the terminal board and replace the
fuse (2) making sure it is replaced with another of the same type.
If necessary, TECNO-GAZ will provide all necessary information to
assist the technical assistance personnel in the fuse change.
All other repairs to be done by TECNO-GAZ.
If the above indications are not enough to solve the problem,
contact the after-sales service.

7.6 Disposal after use

Comply with applicable laws on waste disposal. This product must
not be disposed of in standard waste disposal bins. To avoid risks
for the environment and health deriving from the dispersion of
polluting substances in the environment, separate the various
internal component parts such as iron, aluminium, plastic and
electrical material, and dispose of these through authorized
channels so as to ensure correct recycling.

7.7 Spare parts list

Order code
Z180045
Z300617-N
Z300220-N
Z300016
Z300700
Z400208
Z400195
EN
Page 22 of 32