Extraordinary Maintenance And Repairs; Scrapping And Disposal; Summary Of Critical Instructions - Tecno-gaz Unika Plus Mode D'emploi

15

EXTRAORDINARY MAINTENANCE AND REPAIRS

The machine does not require any extraordinary or periodical maintenance; it contains no components
requiring greasing, nor seals subject to wear.
The electric resistances do not need any maintenance either, unless they are damaged following specific
events.
16

SCRAPPING AND DISPOSAL

The machine drier is machine fully manufactured in AISI 304 stainless steel and equipped with fully inert
electromechanical components.
Scrapping must be entrusted upon firms specialising in the recovery of metals. Do not dump the machine in
unattended places or in instable positions.
17

SUMMARY OF CRITICAL INSTRUCTIONS

01 STORE THE ORIGINAL PACKAGING.
02 USE THE MACHINE ONLY TO DRY HEAT-RESISTANT INSTRUMENTARIUM.
03 DO NOT INSERT FLAMMABLE OBJECTS.
04 DO NOT INSERT OBJECTS WASHED WITH FLAMMABLE SUBSTANCES.
DO NOT INSERT OBJECTS WASHED WITH SUBSTANCES WHICH EMIT TOXIC GASES WHEN
05
HEATED.
06 PLACE THE MACHINE FAR FROM OTHER APPLIANCES.
07 DO NOT INSERT THE MACHINE IN NARROW PLACES (BUILT-IN).
08 REMEMBER THAT THE MACHINE PRODUCES WATER VAPOUR.
09 DO NOT CLEAN THE MACHINE BY MEANS OF WATER JETS OR BY FLOODING.
10 DO NOT TAMPER INSIDE THE MACHINE.
IF REPAIRS ARE NEEDED, CONTACT THE DELIVERY DEPARTMENT OR MANUFACTURER
11
DIRECTLY
12 IN CASE OF SCRAPPING, SEND THE MACHINE TO SPECIALISED FIRMS.
13 STORE THE PRESENT MANUAL IN GOOD CONDITIONS, AVAILABLE TO THE OPERATOR.
- 25 -
ENGLISH