Main switch
CAUTION
Control keyboard
2
Lighted area
MU_023
Rev.2
1
4
3
28/10/2019
OPERATION AND
MAINTENANCE MANUAL
5.2 Description of operation
Mobile and wall version lamps feature a green light switch for
general switching on and off.
In case of single and double ceiling versions position the thermal
magnetic switch near the Product so that it can be switched off in
case of need.
In case of mobile and wall versions do not position the device so it
is hard to reach and remove the power plug in case of an
emergency.
Product control is by means of the control keyboard positioned on
the lower part of the reflector casing. By pressing the keys, the
following functions are started:
I/O long press to start/stop Product (1);
-
increase light intensity '+' (2);
-
reduction of light intensity '-' (3);
-
three green micro-LEDs display the selected intensity level (4).
-
There are seven adjustment levels. With mains power on, a
green micro-led remains on to indicate standby function.
The Product has been designed to ensure a fixed light diameter
without any need for adjustment.
EN
Page 11 of 32