Repairs - Tecno-gaz SLIM Notice D'utilisation Et D'entretien

The Product must only be
opened and repaired by the
Technical Service Personnel for
the fuse change. All other
repairs to be done by the
manufacturer.
Interrupt the power supply
before doing any maintenance
MU_023 Rev.2
jobs.
28/10/2019
OPERATION AND
MAINTENANCE MANUAL

7.5 Repairs

The only repair job with which the technical assistance personnel
are charged is the fuse change.
To access the fuses in the ceiling version, open the bar cover as
indicated in point 5 of paragraph 7.4.
To access the fuses in the mobile version, remove the screws (1), lift
the silicone ring (2) and the cover (3) along the stem.
To access the fuses in the wall version, remove the 4 screws (1) and
the closing box (2).
EN
Page 21 of 32