Graphic Symbols Used In This Operation And Maintenance Manual; Graphic Symbols Used On The Product - Tecno-gaz SLIM Notice D'utilisation Et D'entretien

OPERATION AND
EN
MAINTENANCE MANUAL
3.3 Graphic symbols used in this
operation and maintenance manual
The following safety measures must be put in place during Product
installation, use and servicing.
To emphasize their importance, a number of safety precautions are
repeated throughout the manual.
Follow the safety precautions before using or repairing the Product.
Carefully abiding by the safety precautions improves the ability to
use the Product safely and correctly and helps prevent incorrect
maintenance which could be hazardous and cause damage. The
safety measures are approximate and not exhaustive; the Operator,
the Responsible Organization and the Technical Service Personnel
must develop their capacities to upgrade and integrate them.
General warning signal
General mandatory code of conduct signal
General prohibition signal

3.4 Graphic symbols used on the Product

Below are the symbols to be found on the Product:
CE marking indicating the Product conforms to directive 93/42/EEC
and subsequent amendments and supplements
Date of manufacture (month and year)
Manufacturer's address
Fuses used in the device
Comply with the instructions for use
Model
Serial number
Disposal
Protection earth
MU_023 Rev.2 28/10/2019 Page 7 of 32