Table des Matières
Publicité
28
#4020798 Star flange 164mm(Fig.8-a).
To hold rims with a center hole of 164 mm (6.46").
Description on use is in section 5.2.
Fig.8-a
HOFMANN behält sich das Recht zu Änderungen ohne Vorankündigung vor _ HOFMANN reserves the right of modification without notice _ Document non contractuel
monty 3650
Betriebsanleitung Operator's Manual Notice d' utilisation
291
Modéle: monty 3650_ DE-EN-FR_ Release December 2018
1.9 SAFETY PRECAUTIONS
A. DURING THE USE AND MAINTENANCE OF THE
MACHINE IT IS MANDATORY TO COMPLY WITH ALL
LAWS
AND
REGULATIONS
PREVENTION.
B. THE ELECTRIC POWER SOURCE MUST HAVE A
GROUND CABLE AND THE GROUND CABLE OF THE
MACHINE
(YELLOW
CONNECTED TO THE GROUND CABLE OF THE POWER
SOURCE.
C. BEFORE ANY MAINTENANCE OR REPAIRS ARE
ACCOMPLISHED
THE
DISCONNECTED FROM THE ELECTRIC SUPPLY.
D. NEVER WEAR TIES, CHAINS OR OTHER LOOSE
ARTICLES WHEN USING, MAINTAINING OR REPAIRING
THE MACHINE. LONG HAIR IS ALSO DANGEROUS AND
SHOULD BE KEPT UNDER A HAT.
THE USER MUST WEAR PROPER SAFETY ATTIRE IE;
GLOVES, SAFETY SHOES AND GLASSES.
E. MAINTAIN ALL ELECTRIC CORDS IN GOOD REPAIR.
F. KEEP SAFETY FEATURES IN PLACE AND IN WORKING
ORDER.
G. KEEP WORKING AREA CLEAN. CLUTTERED AREAS
INVITE ACCIDENTS.
H. AVOID DANGEROUS ENVIRONMENTS. DON'T USE
POWER TOOLS OR ELECTRICAL EQUIPMENT IN DAMP
OR WET LOCATIONS, OR EXPOSE THEM TO RAIN.
J. KEEP THE WORK AREA WELL LIGHTED.
1.10 SAFETY DEVICES
This machine has several protectors made of plastic
to prevent compression or crushing hazards.
The rotation speed of the chuck has been limited to
a maximum of 4 rpm to prevent dragging or
entrapping hazards.
FOR
ACCIDENT
WITH
GREEN)
MUST
MACHINE
MUST
BE
BE
Publicité
Table des Matières
