Table des Matières
Publicité
NOTE:
BEFORE CHECKING, ALL CYLINDERS
MUST BE COMPLETELY RETRACTED.
If necessary add:
ESSO
:
Nuto H 46
SHELL
:
Tellus oil 46
TOTAL
:
Azolla 46
Oil change is not required.
7.0 MOVING THE MACHINE
In case the machine is to be moved from a working
place to another, proceed as follows:
Disconnect the machine from the electric supply.
Use belts of a length of mm 3000 (10ft) and capacity
of kg 500 (1100 lbs).
Hold the machine as depicted in Fig.36.
Fig.36
8.0 PUTTING THE MACHINE OUT OF SERVICE
In case the machine is not to be used for a long
period of time (6 months or more) it is necessary to
close the chuck arm, retract all hydraulic cylinders
and disconnect all power sources. Protect all parts
that may be damaged, protect the hydraulic hoses
that may be damaged because of a drying
process.
When putting the machine back in operation,
check first the condition of all previously protected
parts, and check for correct functioning of all
devices before using the machine again.
HOFMANN behält sich das Recht zu Änderungen ohne Vorankündigung vor _ HOFMANN reserves the right of modification without notice _ Document non contractuel
monty 3650
Betriebsanleitung Operator's Manual Notice d' utilisation
269
Modéle: monty 3650 _DE-EN-FR_ Release December 2018
9.0 SCRAPPING THE MACHINE
Once it is decided to no longer use this machine it is
required to make it inoperable by cutting the
electric cord.
To dispose of the equipment at the end of its life,
contact the reseller for a quote or for the
regulations on disposal which apply to the unit.
This symbol indicates that separate collection of
waste electrical and electronic equipment is
mandatory for scrapping.
Instructions for disposal
For electrical and electronic equipment European
directive 2002/95/EC, 2002/96/CE and 2003/108/EC
(RAEE)
At the time of disposal, at the end of the lifetime of
this equipment, you must:
1. Render the machine inoperative, remove the
plug and cut off the power supply cable close to
where it comes out of the machine.
2. DO NOT dispose of the equipment as urban
waste and recycle it, by taking the materials to
suitable recycling centers.
3. Contact the reseller for the closest authorized
recycling centers for the disposal or for the
collection of old equipment when purchasing new
equipment.
4. Stick to the standards for correct waste
management, to prevent potential effects on the
environment and human health. Unauthorized
disposal will result in administrative sanctions for the
offenders.
41
Publicité
Table des Matières
