Table des Matières
Publicité
40
ENSURE
DESCENDS INTO THE DROP CENTER
WHEN THE CLAMP IS OPPOSITE TO THE
TOOL.
STOP
COMPLETE TURN IS MADE TO AVOID
SERIOUS
MOUNTING CLAMP AND TO THE RIM.
DO NOT INFLATE THE TIRE ON THE
MACHINE. THIS MACHINE IS NOT AN
INFLATION DEVICE.
FOR INFLATION PLACE THE WHEEL IN
AN APPROVED INFLATION RESTRAINT
DEVICE (IN THE UNITED STATES OF
AMERICA
REGULATIONS
PROPER
WHEELS AND RIMS).
IMPORTANT!
IT IS NOT POSSIBLE TO MOUNT TWO BEADS AT A TIME
USING THE HOOK TOOL.
HOFMANN behält sich das Recht zu Änderungen ohne Vorankündigung vor _ HOFMANN reserves the right of modification without notice _ Document non contractuel
Betriebsanleitung Operator's Manual Notice d' utilisation
THAT
THE
OUTER
THE
CHUCK
BEFORE
DAMAGES
TO
CONSULT
O.S.H.A.
CONCERNING
SERVICING
OF
Modéle: monty 3650_ DE-EN-FR_ Release December 2018
monty 3650
6.0 MAINTENANCE
BEAD
A. Lubricate all points provided with a greasing
nipple once a month (Fig.34).
Grease the hexagonal shaft once a month.
423
ONE
THE
Fig.34
B. Check hydraulic oil level once a month (Fig.35).
THE
TRUCK,
Fig.35
BEFORE
STARTING
MAINTENANCE OPERATION ENSURE
THAT NO WHEEL IS MOUNTED ON THE
CHUCK AND THAT THE MACHINE IS
DISCONNECTED FROM THE ELECTRIC
SUPPLY.
305
ANY
290
Publicité
Table des Matières
