Mounting Tubeless Truck Tires - Hofmann monty 3650 Manuel De L'opérateur

ENSURE THAT THE OUTER BEAD SLIDES
INTO THE DROP CENTER OPPOSITE TO
THE
DEMOUNTING
IMPOSSIBLE.
280
H. Move to the front of the tire and hold it with both
hands in the last part of demounting operation
to prevent the tire from falling or rolling away out
of control (Fig.27).
Fig.27
HOFMANN behält sich das Recht zu Änderungen ohne Vorankündigung vor _ HOFMANN reserves the right of modification without notice _ Document non contractuel
Betriebsanleitung Operator's Manual Notice d' utilisation
TOOL, OTHERWISE
OPERATION
Modéle: monty 3650 _DE-EN-FR_ Release December 2018
monty 3650

5.5 MOUNTING TUBELESS TRUCK TIRES

MODEL WITH MOUNT/DEMOUNT ROLLERS
THE
IS
A. Liberally lubricate the entire inner surface of the
rim and
mounting
clamp (Fig.28) to the outer rim flange with the
valve at 11 o'clock and the clamp at
12 o'clock.
Fig.28
If the rim is made of a ligth-alloy the rim shape
may not allow to attach the standard
mounting clamp. In such a case use the light-
alloy mounting clamp. The clamp can be used
as shown in Fig.29 or 30.
283
Fig. 29 / 30
the tire beads. Attach
37
the
284
285