Hofmann monty 3650 Manuel De L'opérateur page 39

MODEL WITH HOOK-ROLLER TOOL
E. Liberally lubricate the entire inner surface of the
rim and the tire beads.
F. Move the chuck arm all the way down. Roll the
tire on the footboard and position in on the rim.
Rise the chuck arm, push the tire outer bead by
using roller tool and rotate at the same time
clockwise, till the inner bead is completely
mounted.
Fig.34
Attach the mounting clamp (Fig.35) to the outer rim
flange with the valve at 11 o'clock and the clamp
at 12 o'clock.
Fig.35
HOFMANN behält sich das Recht zu Änderungen ohne Vorankündigung vor _ HOFMANN reserves the right of modification without notice _ Document non contractuel
monty 3650
Betriebsanleitung Operator's Manual Notice d' utilisation
828
286
Modéle: monty 3650 _DE-EN-FR_ Release December 2018
If the rim is made of a ligth-alloy the rim shape
may not allow to attach the standard
mounting clamp. In such a case use the light-
alloy mounting clamp. The clamp can be used
as shown in Fig.36 or 37.
Fig.36 / 37
H. Position the mounting hook about 1/2" (1.5 cm)
to the inside of the rim edge and 1/2" (1.5 cm)
away radially.
Turn the chuck clockwise until the tire is completely
mounted (Fig.38).
Fig.38
39
285
829