Table des Matières
Publicité
30
3.0 INSTALLATION INSTRUCTIONS
To install the machine proceed as follows:
A. Move the control arm to a vertical position.
Install the lock bolt and tighten the nut properly.
Make sure that the electric cable and hydraulic
hoses are not caught nor damaged. (Fig.11).
Fig.11
B. Install the accessories peg and lock with
screw(Fig.11).
C. Remove the screws that secure the machine to
the pallet .
Lift the machine with a belt or a rope of
appropriate strength and length (300 cm - 10')
(Fig.12).
HOFMANN behält sich das Recht zu Änderungen ohne Vorankündigung vor _ HOFMANN reserves the right of modification without notice _ Document non contractuel
monty 3650
Betriebsanleitung Operator's Manual Notice d' utilisation
299
Modéle: monty 3650_ DE-EN-FR_ Release December 2018
Fig.12
DO NOT SWING THE MACHINE WHEN
LIFTED.
D. Remove the lifting aid screw (Fig.13).
Fig.13
E. Place
the
accessories
provided.
269
271
onto
the
support
Publicité
Table des Matières
