AIDIAN QuikRead go Mode D'emploi page 9

Power supply cable &
accumulator
QuikRead go Instrument can be used either by the
power supply cable or the accumulator.
The accumulator is charged automatically when
the power cable is plugged in.
USB
RJ-45
Please consult
instructions for use
Power
On-Off switch
Picture 6
Symbols on QuikRead go Instrument
Connectors and cables
In the back of the instrument there are five con-
nectors with symbols describing their use.
One USB connector is placed on the right side
of the instrument. All symbols are described in
Picture 6.
The RJ-45 connector can be used for serial and
LAN connections. Wiring diagram of the cable is
described at quikread.com.
Picture 7
Connecting Power Supply Cable
Plugging the power supply cable
Plug the power supply cable into the back of the
instrument (see Picture 7). Plug the power supply
into a power outlet.
GETTING STARTED 9