Publicité
Les langues disponibles
Les langues disponibles
Results
The results are stored in Results file, where they
can be viewed, printed or transferred to USB stor-
age. Results file consists of the following submenu
items: Last results, Last Quality Control results, LIS
offline results and Delete result history.
LIS offline results are stored in the memory of
QuikRead go Instrument which is normally con-
nected to an LIS but has temporarily been in LIS
offline mode, e.g. during a home or a ward visit.
Viewing results
To view the results choose Results in the main
menu. You can select Last results or Last QC
results or LIS offline results. The results can be
scrolled with the up and down buttons on the right.
The results can be sorted by Time, Test or
Results
Date:
ALL
Test:
ALL
Patient ID:
ALL
Select printing definitions, then press "OK"
Cancel
Patient ID by choosing the relevant buttons.
Touching a result line gives detailed information of
a single measurement.
Deleting result history
Choosing Delete result history permanently de-
letes all results from the history file. The instru-
ment will ask for confirmation before deletion.
Printing results
To print results, choose Last results. By touching
a result line it is possible to print a single result.
The results can also be print sorted by Time, Test
or Patient ID. Touch the desired sorting criterion
and then touch Print button. Select the results to
...
be printed through
buttons (see Picture 21).
Choose OK to start printing.
10:26
LAST 100 RESULTS :: PRINT
...
...
...
Picture 21
Next
Pringting results
Transferring results to USB storage
The results can be transferred to a USB storage.
Connect a USB-storage to a USB port. Choose
Transfer to USB, select the results to be trans-
ferred and choose OK (see Section "Printing re-
sults"). Don't remove the USB storage until the
transfer is completed. After completion of the
transfer a message "Transferring completed. You
can now safely remove the USB storage." will be
shown.
Sending offline results to LIS/HIS
All the results not sent to LIS can be viewed by
choosing LIS offline results. Choosing Send to
LIS sends the result to the LIS system, and after
a successful transfer the results are deleted from
the LIS offline memory. Choosing Delete offline
results deletes the results without sending them
to the LIS.
QuikRead go Instrument checks the LIS connec-
tion automatically during start-up, when entering
the main menu and after every measurement. If
a connection is available and there is data in the
LIS offline result history, QuikRead go Instrument
automatically proposes sending the offline results
to the LIS.
USAGE
21
Publicité
