AIDIAN QuikRead go Mode D'emploi page 10

Inserting the accumulator
Please follow carefully the steps below for inserting
the accumulator to QuikRead go Instrument (see
.
Picture 8)
1. Turn off the instrument (if on).
2. Unplug the power supply cable.
3. Turn the instrument onto its side on a table.
4. Open the accumulator cover.
5. Attach the accumulator connector to the ac-
cumulator.
6. Press the accumulator into its place and en-
sure that it is placed properly.
7. Close the accumulator unit cover.
8. Turn the instrument back to a standing
position.
10
GETTING STARTED
1
Picture 8
1. Accumulator unit cover
2. Accumulator connector
3. Accumulator unit
4. Clock battery
2 4
3