Betzold 89211 Mode D'emploi page 57

All manuals and user guides at all-guides.com
263. Vibration-operated sound of an ambulance with visual display
Connect the points B and G. On operating the vibration switch (10) the
loudspeaker (20) briefly emits the sound of an ambulance and the LED
(17) lights up.
264. Vibration-operated sound of a gaming machine with visual display
Remove the connection C – D. On operating the vibration switch (10)
the loudspeaker (20) briefly emits the sound of gaming machine and the
LED (17) lights up.
265. Vibration-operated sound of a vibration with visual display
Connect the points B and F. On operating the vibration switch (10) the
loudspeaker (20) briefly emits the sound of a vibration and the LED (17)
lights up.
266. Vibration-operated tones with visual display
Replace the alarm-IC (22) with the music-IC (21). On operating the
vibration switch (10) the loudspeaker (20) briefly emits tones and the
LED (17) lights up.
267. Contact-operated tones with visual display
Replace the vibration switch (10) with the contact switch (12). On
touching the switch surface (12) the loudspeaker (20) briefly emits the
sound of a police siren and the LED (17) lights up.
10. Music-IC Controlled Effect-IC with Loudspeaker and various Sensors
268. Magnet-controlled sound of „spacecraft music"
For technical reasons the contact switch (12) must be replaced with the
reed switch (13). Close the slide switch (15). Only music is heard. Bring
the magnet close to the reed switch (13). Now music underscored with
spacecraft sounds comes out of the loudspeaker (20).
269. Hand-controlled sound of „spacecraft music"
Replace the reed switch (13) with the pressure switch (14). Press this.
Now music underscored with spacecraft sounds comes out of the
loudspeaker (20).
270. Contact-controlled sound of a spacecraft – police siren
Close the slide switch (15). Touch the switch surface (12). The sound
of a police siren underscored with spacecraft sounds comes out of the
loudspeaker(20).
271. Vibration-controlled sound of a spacecraft – police siren
Replace the contact switch (12) with the vibration switch (10). On its
operation the sound of a police siren underscored with spacecraft sounds
comes out of the loudspeaker(20).
272. Vibration-controlled sound of a spacecraft - flashing lights
Replace the loudspeaker (20) with the LED (17) (the positive pole on top).
On vibration the LED (17) flashes and the sound of a spacecraft comes
out of the sound transducer (11).
273. Contact-controlled sound of a spacecraft - flashing lights
Install the contact switch (12) in its original place and then touch it. The
LED (17) flashes and the sound of a spacecraft comes out of the.sound
transducer (11).
– 57 –
© Arnulf Betzold GmbH