Betzold 89211 Mode D'emploi page 53

6. Time Control of the Alarm-IC with the Music-IC
A: Loudspeaker Playback with various Controls (Sensors)
All manuals and user guides at all-guides.com
199. Light-operated sound of a police siren
Close the slide switch (15). Shade the photo-sensor (16), for example,
with the magnet. When the music stops, you can operate the siren sound
with light.
200. Light-operated sound of thunder
Connect the points E and F. You can operate the thunder sound with light.
201. Light-operated sound of a fire brigade
Connect the points A and B. You can operate the fire brigade sound with
light.
202. Light-operated sound of an ambulance
Connect the points B and G. You can operate the ambulance sound with
light.
203. Light-operated sound of a gaming machine
Remove the connection C – D. Connect the points A and B. You can
operate the ambulance sound with light.
204. Light-operated sound of a vibration
Connect the points B and F. You can operate the vibration sound with
light.
205. Humidity-operated sound of a police siren
Replace the photo-sensor (16) with the humidity switch (12). When
moisture touches the contact surface, the sound of a police siren comes
from the loudspeaker (20).
206. Humidity-operated sound of thunder
Replace the photo-sensor (16) with the humidity switch (12). Connect the
points E and F. You can operate the sound of thunder with moisture.
207. Humidity-operated sound of a fire brigade
Replace the photo-sensor (16) with the humidity switch (12). Connect the
points A and B. You can operate the fire brigade sound with moisture.
208. Humidity-operated sound of an ambulance
Replace the photo-sensor (16) with the humidity switch (12). Connect the
points B and G. You can operate the ambulance sound with moisture.
209. Humidity-operated sound of a gaming machine
Replace the photo-sensor (16) with the humidity switch (12). Remove
the connection,C – D. Connect the points A and B. You can operate the
gaming machine sound with moisture.
210. Humidity-operated sound of a vibration
Replace the photo-sensor (16) with the humidity switch (12). Connect
the points B and F. You can operate the gaming machine sound with
moisture.
211. Humidity-operated LED
Replace the photo-sensor (16) with the humidity switch (12). Replace the
loudspeaker (20) with the LED (17). You can operate the LED (17) with
moisture.
212. Light-operated LED
Replace the humidity switch (12) with the photo-sensor (16). When light
falls on the photo-sensor (16) the LED (17) lights up.
– 53 –
© Arnulf Betzold GmbH