Betzold 89211 Mode D'emploi page 55

C: Visual Reproduction with LED with various Controls (Sensors)
7. Time Control of the Sound Effect-IC with the Music-IC
A: Loudspeaker Playback with various Controls (Sensors)
All manuals and user guides at all-guides.com
237. Sound-operated flashing LED light –1 –
Close the slide switch (15). When the LED (17) goes out, clap your
hands. The LED (17) flashes for a while.
238. Sound-operated flashing LED light – 2 –
Replace the sound transducer (11) with the loudspeaker (20), connect it
to the points I and J. Clap your hands. The LED (17) flashes for a while.
239. Motor-operated flashing LED light
Replace the sound transducer (11) with the motor (24), connect it to the
points I and J. When the LED (17) goes out, slightly turn the motor axle.
The LED (17) flashes for a while.
240. Time-limited, hand-operated flashing LED light
Replace the sound transducer (11) with the pressure switch (14),
connect it to the points I and J. Press the switch. The LED (17) flashes
for a while.
241. Time-limited, vibration-operated flashing LED light
Connect the vibration switch (10) to the points I and J. Tap on it. The
LED (17) flashes for a while.
242. Sound-operated music
Close the slide switch (15). When the music stops, clap your hands.
Music can be heard from the loudspeaker (20) again.
243. Vibration-operated music
Replace the sound transducer (11) with the vibration switch (10).
Connect the vibration switch (10) to the points I and J. When the switch
is operated, music comes from the loudspeaker (20).
244. Time-limited, hand-operated music
Replace the sound transducer (11) with the pressure switch (14). When
the music stops, press the pressure switch (14). Music comes from the
loudspeaker (20) again.
245. Motor-operated music
Connect the motor (24) to the points I and J and slightly turn the motor
axle. Music comes from the loudspeaker (20).
246. Time-limited, sound-operated flashing LED light – 1 –
Replace the loudspeaker (20) with the LED (17) (with the positive pole
upwards). Clap your hands. The LED (17) flashes for a while.
247. Time-limited, sound-operated flashing LED light – 2 –
Connect the loudspeaker (20) to the points I and J. Clap your hands.
The LED (17) flashes for a while.
248. Time-limited, vibration-operated flashing LED light
Connect the vibration switch (10) to the points I and J. By tapping on the
switch the LED (17) flashes.
249. Time-limited, hand-operated flashing LED light
Connect the pressure switch (14) to the points I and J. By tapping on
the switch the LED (17) flashes.
250. Time-limited, motor-operated flashing LED light
Connect the motor (24) to the points I and J, slightly turn the motor axle.
The LED (17) flashes.
– 55 –
© Arnulf Betzold GmbH