Betzold 89211 Mode D'emploi page 50

5. Sound Effect-IC (Spacecraft Sound)
A: Various Controls (Sensors) with Loudspeaker
All manuals and user guides at all-guides.com
168. Hand-controlled roaring sound
Operate with both hands or alternately the slide switch (15) and the
pressure switch (14). The sound of various noises is heard as if a
spacecraft is flying.
169.Magnet-controlled roaring sound
Replace the slide switch (15) with the reed switch (13). The spacecraft
sound can be controlled with the magnet.
170. Light-controlled roaring sound
Replace the slide switch (15) with the photo-sensor (16). The spacecraft
sound can be so controlled if you use a lamp from above for the direct
illumination of the sensor (16) (for example, the light bulb (18) and the
other battery box).
171. Contact-controlled roaring sound
Replace the pressure switch (14) with the contact switch (12). The
spacecraft sound can be controlled through the repeated touching of the
switch surface.
172. Tapping-controlled roaring sound
Replace the pressure switch (14) with the vibration switch (10). You can
now control the spacecraft sound through tapping.
173. Tapping-operated LED
Keep the vibration switch (10). Replace the loudspeaker (20) with the
LED (17), tap and the LED (17) lights up.
174. Tapping-operated lamp
Keep the vibration switch (10). Replace the loudspeaker (20) with the
lamp (18), tap after closing the slide switch (15) and the lamp (18) lights
up.
175. Light-operated LED
Replace the slide switch (15) with the photo-sensor (16) (likewise in
176). Replace the loudspeaker (20) with the LED (17). Whenever light
falls on the photo-sensor (16) the LED (17) lights up.
176. Light-operated lamp
Replace (as in 175) the loudspeaker(20) with the lamp (18). Whenever
light falls on the photo-sensor (16) the lamp (18) lights up.
177. Contact-operated LED
Replace the pressure switch (14) with the contact switch (12). Replace
the loudspeaker (20) with the LED (17). The LED (17) lights up through
touching the contact surface.
– 50 –