Betzold 89211 Mode D'emploi page 44

All manuals and user guides at all-guides.com
E: Sound Transducer
81. Hand-operated music sound transducer
Close the slide switch (15). When the music stops, you can allow it to
play again via the pressure switch (14).
82. Magnet-operated music sound transducer
Replace the pressure switch (14) with the reed switch (13). The music
can be switched on with the magnet.
83. Light-operated music sound transducer
Replace the pressure switch (14) with the photo-sensor (16). The music
can now be switched on with light.
84. Moisture-operated music sound transducer
Replace the pressure switch (14) with the humidity switch (12). When
moisture touches the switch plate the sound transducer (11) allows the
music to be played.
85. Sound-operated music sound transducer – 1 –
Connect the loudspeaker (20) to the points A and B. When the music
stops, clap your hands loudly and the sound transducer (11) allows the
music to play again.
86. Sound-operated music sound transducer – 2 –
Connect the loudspeaker (20) to the points B and C. When the music
stops, clap your hands loudly and the sound transducer (11) allows the
music to play again.
87. Motor-operated music sound transducer – 1 –
First replace the motor (24) with the lamp (18). Then connect the
motor (24) to the points A and B. When the music stops, slightly turn the
axle of the motor (24). The sound transducer (11) allows the music to play.
88. Motor-operated music sound transducer – 2 –
First replace the motor (24) with the lamp (18). Then connect the motor
(24) to the points B and C. When the music stops, slightly turn the axle of
the motor (24). The sound transducer (11) allows the music to play.
89. Time-limited, vibration-operated music sound transducer – 1 –
Close the slide switch (15). When the music stops, tap lightly on the
base plate and the sound transducer (11) allows the music to play.
90. Time-limited, vibration-operated music sound transducer – 2 –
Replace the resistor (30) with the vibration switch (10), tap lightly on the
base plate and the sound transducer (11) allows the music to play.
91. Time-limited, hand-operated music sound transducer – 1 –
Replace the vibration switch (10) with the pressure switch (14). Press
this and the sound transducer (11) allows the music to play.
92. Time-limited, hand-operated music sound transducer – 2 –
Replace the resistor (30) with the pressure switch (14). Press this and
the sound transducer (11) allows the music to play.
93. Time-limited, hand-operated music sound transducer – 3 –
Remove the vibration switch (10). Keep the resistor (30). Connect the
pressure switch (14) to the points A and B .
– 44 –