Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
107. Flashing light with music
Close the slide switch (15). When the music stops, press the pressure
switch (14). The lamp (18) flashes and the music is started again.
108. Time-limited LED flashing time delayed
Replace the loudspeaker (20) with the LED (17). Press the pressure
switch (14). The lamp (18) lights up and the LED (17) flashes for a while.
109. Flashing light and music motor
Replace the loudspeaker (20) with the motor (24). Press the pressure
switch (14). The lamp (18) flashes and the motor (24) allows the music
to play.
110. Flashing light and music sound transducer
Replace the loudspeaker (20) with the sound transducer (11). Press the
pressure switch (14). The lamp (18) flashes and the sound transducer
(11) allows the music to play very quietly.
111. Music plays on switching off the motor
Replace the lamp (18) with the motor (24). Place the loudspeaker(20)
in its original place. Briefly press the pressure switch (14) and the
loudspeaker (20) allows the music to play.
112. LED lights up time-limited on switching off the motor
Firstly replace the lamp (18) with the motor (24). Then replace the
loudspeaker(20) with the LED (17). Briefly press the
pressure switch (14) and the LED (17) will then light up for a while.
113. Lamp lights up time-limited on switching off the motor
Replace the loudspeaker (20) with the lamp (18). Briefly press the
pressure switch (14) and the lamp (18) will then light up for a while.
114. Music plays from the sound transducer time-limited on switching
off the motor
Replace the loudspeaker (20) with the sound transducer (11) and
connect the lamp (18) in parallel. Briefly press the pressure switch (14)
and the sound transducer (11) allows the music to play very quietly.
G:Tone Changes
115. Vibration switch-operated doorbell with slow, rhythmical music – 1 –
Connect the vibration switch (10) to the points A and B. When the sound
stops, tap and the loudspeaker (20) allows the slow, rhythmical music to
play (if the effect is not convincing,you can also connect the
capacitor (44) with the LED (17) in parallel).
116. Vibration switch-operated doorbell with slow, rhythmical music – 2 –
Connect the vibration switch (10) to the points B and C and connect
the resistor to the points A and B. When the sound stops, tap and the
loudspeaker (20) allows the slow, rhythmical music to play (if the effect
is not convincing,you can also connect the capacitor (44) with the
LED (17) in parallel).
117. Sound-operated doorbell with slow, rhythmical music – 1 –
Connect the sound transducer (11) to the points A and B. When the
sound stops, clap your hands and the loudspeaker (20) allows the
slow, rhythmical music to play.
– 46 –
Publicité
