Nilfisk Advance Proterra 13300109 Instructions D'utilisation page 9

revised 08/2018
Guide lines to bacteria control and other dangers coming from the presence of microbes in the dust guard system
(optional).
WARNING!
To prevent the operators and other people from developing infections caused by microbes and Legionella that
may flourish in the dust guard system, take the following precautions:
– If possible, fill the tank with cold water (< 20 °C).
– DO NOT use stagnant water to fill the tank.
– DO NOT use recycled water, undrinkable water or water that has been in contact with the soil.
– Adjust and turn the nozzles towards the floor only, from preventing possible inhaling.
– Do not store the machine outdoors or near sources of heat.
– Do not over-fill the tank. Fill the tank sufficiently so that it can be emptied by using the system.
– Empty the tank every 10 hours or once a week, according to the use.
– If the machine is not used for more than one week, empty the tank completely, and let it dry before storing it.
– If the tank cannot be cleaned regularly, consider using a biocide that can kill or exert a controlling effect on
Legionella bacteria. Biocide must be chosen according to the local regulations and must be used according
to the relevant instructions and cautions, to avoid that the personnel gets affected by dangerous chemical
substances.
– If chemical products have to be used in the water tank, it is mandatory to apply the relevant information and
caution labels of the product.
HOPPER SAFETY SUPPORT
CAUTION!
Before performing any maintenance procedure under or near to the lifted hopper, pull the locking handle (39) to
make sure the hopper safety support (5) is in place. The hopper safety support (5) holds the hopper in the lifted
position to allow work to be performed under the hopper. Never rely on the machine's hydraulic components to
safely support the hopper.
JACKING THE MACHINE
WARNING!
Never work under a machine without safety stands or blocks to support the machine.
When jacking the machine, do so at designated locations (do not jack on the hopper) - see jacking locations (8).
MACHINE TRANSPORT
WARNING!
Before transporting the machine on an open truck or trailer, make sure that:
– All access doors are latched securely.
– The machine is tied down securely.
– The parking brake is engaged.
INSTRUCTIONS FOR USE
33019864 - Proterra™
ENGLISH
7