Nilfisk Advance Proterra 13300109 Instructions D'utilisation page 30

ENGLISH
ENGINE OIL
WARNING!
Do not touch hot components.
Let the engine cool down.
1. Drive the machine on a level floor, engage the parking
brake and turn the ignition key (65) to "O".
2. Open the engine compartment hood (1) by using the
unlocking push-button (25).
3. Check the engine oil level with the dipstick (A, Fig. 10-11)
before each use of the machine.
If necessary, open the plug (B, Fig. 11) and top up.
(See the procedure in the engine relevant Manual).
4. Change the engine oil after the first 50 hours of operation,
and then after 150 hours.
The oil filter (C) should be replaced with every oil change
(see the procedure in the Service Manual).
According to the air temperature, use the type of oil
indicated below:
TEMPERATURE RANGE
Above 60°F (15°C)
Below 60°F (15°C)
28
INSTRUCTIONS FOR USE
TYPE OF OIL
SAE 10W-30
SAE 5W-30
Proterra™ - 33019864
A
MIN
Figure 10
C
Figure 11
revised 08/2018
MAX
P100329A
B
A
P100329P