Télécharger Imprimer la page

MSA V-Gard H1 Manuel D'utilisation page 8

Masquer les pouces Voir aussi pour V-Gard H1:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 40
Installing the Visor
For ANSI Z87.1
Manufacturer
Standard number
Impact rated symbol
Scale number
(Filter type: U = Ultraviolet, L = Visible light
Resistance to fogging
3
Installing the Visor
(1)
(2)
(3)
(4)
4
Maintenance
Do NOT use paint thinner, solvents, or hydrocarbon-type cleaners such as methyl ethyl ketone (MEK),
gasoline, or kerosene on the helmet or accessories. These substances can cause damage that you
cannot see.
Do NOT use a dry or coarse cloth to clean this protective equipment. A dry or coarse cloth will cause
scratches. Scratches on this protective equipment decrease eye protection and field of view. If this
protective equipment shows scratches or other damage, replace it immediately.
Failure to obey this warning can result in serious injury or death.
Use a soft cloth, mild soap, and warm water to clean and disinfect the protective equipment assembly.
US
Let the protective equipment assembly air-dry.
5
Storage and Product Lifetime
6
Ordering Information
Part Number
10194818
10194819
10194820
10217333
8
MSA
Z87
Installing the visor assembly
Working position
Storage position
Removing the visor assembly
WARNING!
Description
Clear Faceshield for V-Gard H1 Safety Helmet
Mesh/Forestry Faceshield for V-Gard H1 Safety Helmet
Clear Half-Face Spectacle for V-Gard H1 Safety Helmet
Shaded Half-Face Spectacle for V-Gard H1 Safety Helmet
®
V-Gard
+
U6 L2.5
X
Fig. A. Aligning bracket and accessory rail on helmet
Fig. B. Assembling with a "click!"
Fig. C. Faceshield
Fig. D. Spectacle
Fig. E. Faceshield
Fig. F. Spectacle
Fig. G. Storage position, push button for removal
Fig. H. Slide out from accessory rail
Heat, cold, chemicals, and sunlight have an effect on
the protective equipment. Keep the protective equip-
95°F
ment in a clean, dry area at room temperature. This
(35°C)
protective equipment has a service life of 3 years, in
41°F
(5°C)
addition to storage time. The protective equipment can
be kept in storage for up to 2 years.
H1 Safety Helmet - Eye and Face Protection

Publicité

loading