Publicité
Les langues disponibles
Les langues disponibles
Maintenance and cleaning / Boiler with ash-compactor
All cleaning of all parts must be carried out with the Boiler completely cold and
unplugged to avoid burns and thermal shock. The boiler does not need much
maintenance if used with certified quality pellet. The need for maintenance vari-
es depending on the conditions of use (switching on and off repeatedly) and depending
on the performance required. It is recommended periodic monitoring of the boiler to
check its condition.
Parts
Brazier
Cleaning the ash collection
compartment with suction device
Cleaning ash tray
Exchanger (turbulators)
Flame-shell
Cleaning the interior heat
exchanger /
smoke fan compartment
Cleaning complete exchanger
Clean "T" to exhaust
Flue
Door gasket ash
Internal parts
Flue pipe
Circulation pump
Heat exchanger (where present)
Cochlea
Hydraulic components
Electromechanical components
◊ by the user / • by the authorised qualified technical assistance
Clean the brazier from the ash and any rest with
the appropriate tool. They could obstruct the air
passages.
If the pellet in the tank is exhausted, there might be
a residual unburnt pellets in the brazier. If the pellet
in the tank is exhausted, there might be a residual
unburnt pellets in the brazier. It's also important to
clean the ash accumulated inside of the combustion
room around the brazier. The frequency of this
operation depends on the use of the boiler.
42
Every 2-3
Everyday
days
◊
◊
◊
Every
Every 15
Every 30
week
days
days
◊
◊
Every 60-
Every 1
90 days
year
•
•
•
•
•
•
•
•
•
•
•
•
Publicité
