Publicité
Les langues disponibles
Les langues disponibles
Maintenance and cleaning / Boiler with cast iron brazier
All cleaning of all parts must be carried out with the Boiler completely cold and unplugged
to avoid burns and thermal shock. The boiler does not need much maintenance if
used with certified quality pellet. The need for maintenance varies depending on the
conditions of use (switching on and off repeatedly) and depending on the performance
required.
It is recommended periodic monitoring of the boiler to check its condition.
Parts
Brazier
Cleaning the ash collection
compartment with suction device
Cleaning ash tray
Exchanger (turbulators)
Flame-shell
Cleaning the interior heat
exchanger /
smoke fan compartment
Cleaning complete exchanger
Clean "T" to exhaust
Flue
Door gasket ash
Internal parts
Flue pipe
Circulation pump
Heat exchanger (where present)
Hydraulic components
Electromechanical components
◊ by the user / • by the authorised qualified technical assistance
BY THE USER Daily control
The boiler requires a simple and thorough cleaning
in order to ensure a more efficient performance
and smooth operation. Clean the grate using the
appropriate tool from the ash and any incrustation
which could obstruct the passage of air. In the case
of depletion of pellets in the tank may accumulate
unburned pellets in the burn pot. Always empty the
residuals from the grate before each start. Remember
that only a brazier located and clean properly can
ensure ignition and optimal operation of your boiler.
When positioning the crucible, carefully check that the
ends of the pads completely adhere to their home and
that the hole with pipe dedicated to the passage of the
resistance. There should be no residual combustion in
the contact zone between the edges of the crucible
and the support surface on the door crucible.
Every 2-3
Everyday
days
◊
◊
◊
◊
◊
Every
Every 15
Every 30
week
days
days
Every 60-
Every 1
90 days
year
•
•
•
•
•
•
•
•
•
•
•
37
Publicité
